Wet chemical fire suppression systems use a suppression tank, which holds the chemical, and fixed piping with nozzles to discharge the chemical agent in the ductwork, plenum space, and cooking surfaces. It is critical that your system be designed for your unique kitchen and installed by contractors who have been certified by the system’s manufacturer. If properly installed, your wet chemical fire suppression system will provide the means for manual activation and will automatically shut off all sources of fuel and electrical power to the equipment protected by that system, including any gas appliance whether protected or not. This 2 part series of articles will discuss the installation and operational requirements for wet chemical fire suppression systems.

Operational Requirements

There are several operational requirements that must be considered during the design and installation. For example, when two or more hazards could be simultaneously involved in a fire based on their proximity, they are considered a single hazard area, and all fire suppression systems for each hazard must be set up to automatically operate simultaneously if any one of them is activated. Generally, hoods installed end to end, back to back, or both, or those sharing a common ductwork with one or more grease-producing appliances located under any of them, are considered a single hazard area. In these cases, your fire suppression systems for each hood must be set to operate all at once if any one of them is activated to minimize the potential for fire to spread from one hood to another. The only exception to this is where the hoods do not share a common exhaust, are separated by a wall, or have some other means to ensure that grease-laden vapors from one hood cannot exhaust to another.

You must have at least one manual actuation device between 10-20 feet from the protected appliances within the path of egress, and all manual activation devices must be separate from your system’s automatic means of activation so that failure of one will not prevent the function of the other. Your means of manual activation can be mechanical or rely on electric power but must:

• Be readily accessible in the event of a fire and located in a path of egress
• Clearly identify the hazard protected
• Not require more than 40 pounds of force or have a pull movement greater than 14 inches (if using a cable pull device)
• Have a source of standby power (if using an electrical device)

Generally, wet chemical fire suppression systems also must include a supervisory alarm with a reserve power supply to notify you if there’s a problem with the system. In addition, for establishments in which the kitchen is exposed to the dining area, the fire suppression system must also be connected to the fire alarm signaling system to alert your customers in the event of a fire.

The Jay L Harman Fire Equipment team understands your firefighting needs and is ready to help

Jay L Harman’s DOT Hydrostatic Testing facility and equipment meet all NFPA requirements for the hydrostatic testing of self contained breathing apparatus compressed gas cylinders in addition to testing ABC portable fire extinguisher cylinders.

Jay L Harman is the best and one of the biggest firefighting equipment suppliers and service providers in the region, specializing in fire suppression systems, fire extinguishers, emergency lighting, fire hoses, hydrostatic testing and more. Serving El Paso TX, Las Cruces NM and the surrounding areas, we pride ourselves on buying local and hiring local whenever possible.

Jay L Harman Fire Equipment is your go-to distributor for OVAL low-profile fire extinguishers in West Texas and New Mexico.

Contact Jay L. Harman Fire Equipment in El Paso TX at 915-533-7021 or Las Cruces NM at 575-523-8880..

Since 1925, we have protected businesses throughout the area from the harms and hazards of fires. Every Jay L Harman technician is licensed and regulated by the Texas Department of Insurance State Fire Marshal’s Office.  Each of these technicians continually receives the most up-to-date factory training and certifications by our manufacturers. Contact Jay L Harman Fire Equipment today. Let our friendly and knowledgeable staff tell you more about our fire suppression systems and help you find the ideal fire suppression system for your needs. Learn more about our full offering of fire extinguisher training, firefighting services, firefighting products, request a quote, ask a question or request additional information.